AF Cutter

Seried AF Cutters are engineeredfor the higher speeds and feeds demanded by automatic cutting. The right comnination of Rake, Relief and Face Relief angles results in faster cutting and better finishes.

Note: Some AFS Cutters must be altered to fit Model 5 Davis Keyseaters (up to Serial No. 5-1363), at an additional cost. All Model 5 Machines (Serial No. 5-1364 and higher) will accept AF and AFS Cutters without modification.

1/16

3/8

5/16

16

3/32

7/16

5/16

16

1/8

7/16

5/16

16

5/32

1/2

5/16

16

3/16

1/2

5/16

16

3/16

3/4

5/16

20

1/4

3/4

5/16

20

5/16

1

1/2

20

3/8

1

1/2

20

7/16

1

1/2

20

1/2

1

1/2

20

1/2

1-1/2

3/4

30

9/16

1

1/2

20

5/8

1

1/2

20

5/8

1-1/2

3/4

30

3/4

1

1/2

20

3/4

1-3/4

1

30

7/8

1

1/2

20

7/8

1-3/4

1

30

1

1

1/2

20

1

1-3/4

1

30

1-1/8

1-1/8

3/4

20

1-1/8

2

1

30

1-1/4

1-1/4

3/4

20

1-1/4

2

1

30

1-1/2

1-1/2

3/4

20

1-1/2

2

1

30

** = Reinforced back 3/16" thick.

All Standard Cutters are ground 0.0005" to 0.0015" larger than the standard Keyway size.

2mm

3/8

5/16

16

3mm

3/8

5/16

16

4mm

3/8

5/16

16

5mm

1/2

5/16

16

5mm

1/2

5/16

20

6mm

5/8

5/16

20

8mm

3/4

1/2

20

10mm

1

1/2

20

12mm

1

1/2

20

12mm

1-1/2

3/4

30

14mm

1

1/2

20

14mm

1-1/2

3/4

30

16mm

1

1/2

20

16mm

1-1/2

3/4

30

18mm

1

1/2

20

18mm

1-3/4

1

30

20mm

1

1/2

20

20mm

1-3/4

1

30

22mm

1

1/2

20

22mm

1-3/4

1

30

25mm

1

1/2

20

25mm

1-3/4

1

30

28mm

1-1/8

3/4

20

28mm

2

1

30

32mm

1-1/4

3/4

20

32mm

2

1

30

36mm

1-1/2

3/4

20

36mm

2

1

30

** = Reinforced back 3/16" thick.

All Standard Cutters are ground 0.0005" to 0.0015" larger than the standard Keyway size.