Go to Home page

Cutter Sets

Davis Cutter Sets

Sets cover the suggested range of cutters needed for either Model 5 or Model 15 Davis Keyseaters.

Note: Some AFS Cutters must be altered to fit Model 5 Davis Keyseaters (up to Serial No. 5-1363), at an additional cost. All Model 5 Machines (Serial No. 5-1364 and higher) will accept AF and AFS Cutters without modification.

Cutter Sets
Part #
Cutter Style
Set Includes (one of each)
 
DA-17-2
AF
  • 1/16" wide x 3/8" high x 16" long
  • 3/32" wide x 3/8" high x 16" long
  • 1/8" wide x 3/8" high x 16" long
  • 3/16" wide x 9/16" high x 16" long
  • 1/4" wide x 3/4" high x 20" long
  • 5/16" wide x 7/8" high x 20" long
  • 3/8" wide x 7/8" high x 20" long
  • 1/2" wide x 1" high x 20 " long
  • 5/8" wide x 1" high x 20" long
  • 3/4" wide x 1" high x 20" long
DA-17-4
AF
  • 2mm wide x 3/8" high x 16" long
  • 3mm wide x 7/16" high x 16" long
  • 4mm wide x 7/16" high x 16" long
  • 5mm wide x 1/2" high x 16" long
  • 6mm wide x 5/8" high x 20" long
  • 8mm wide x 7/8" high x 20" long
  • 10mm wide x 1" high x 20" long
  • 12mm wide x 1" high x 20 " long
  • 16mm wide x 1" high x 20" long
  • 20mm wide x 1" high x 20" long
DA-18-2
AF
  • 7/8" wide x 1" high x 20" long
  • 1" wide x 1" high x 20" long
  • 1-1/8" wide x 1-1/8" high x 20" long
  • 1-1/4" wide x 1-1/4" high x 20" long
  • 1-1/2" wide x 1-1/2" high x 20" long
DA-18-5
AFS
  • 7/8" wide x 1" high x 20" long
  • 1" wide x 1" high x 20" long
  • 1-1/8" wide x 1-1/8" high x 20" long
  • 1-1/4" wide x 1-1/4" high x 20" long
  • 1-1/2" wide x 1-1/2" high x 20" long
DA-18-4
AF
  • 22mm wide x 1" high x 20" long
  • 25mm wide x 1" high x 20" long
  • 28mm wide x 1-1/8" high x 20" long
  • 32mm wide x 1-1/4" high x 20" long
  • 26mm wide x 1-1/2" high x 20" long
DA-18-6
AFS
  • 22mm wide x 1" high x 20" long
  • 25mm wide x 1" high x 20" long
  • 28mm wide x 1-1/8" high x 20" long
  • 32mm wide x 1-1/4" high x 20" long
  • 26mm wide x 1-1/2" high x 20" long