- Controlled Axes- 3 Simultaneous
- Least Increment- 0.0001"
- Interpolation Unit- 0.0001"
- Max. Command Value- +/- 8 Digits
- Single Direction Positioning
- Linear Interpolation
- Milt-Quadrant Circular Interpolation
- Feedrate Command- mm/min, in/min
- High Speed Skip Function
- Feedrate Override- 0-150% (per 10%)
- Rapid Traverse Override- 25, 50, 100%
- Override Cancel
- Automatic Acceleration/Deceleration
- Exact Atop- G04, G09, G61
- Manual Absolute- On/Off
- Dwell- G04
- Reference Point Return- Manual/Automatic
- Second Reference Point Return
- Automatic Coordinate System Setting
- Absolute/Incremental Programming
- Decimal Point Input/Pocket Calculator
- Mirror Image
- Look Ahead Control
- Run Hour and Parts Count Display
- Reader/Punch interface- RS232C
- DNC Operation
- Polar Coordinate Command
- Custom Macro A
- Coordinate System Rotation
- Play Back
|
- Program Number- 4 Digit
- Sequence Number Display- 4 Digit
- Clock Function
- Main Program/Subprogram
- Tape Code- EIA/ISO Auto-Recognition
- Tape Format for FS 10/11
- Label Skip
- Control In/Out
- Optional Block Skip
- Tool Life Management
- Tool Offset memory- 6+/- Digits, 400 Pieces
- Tool Length Compensation- G43, G44, G49
- Tool Length Measurement
- Cutter Radius Compensation C
- Backlash Compensation
- Manual Pulse Generator- One Axis
- Cycle Start/Feed Hold
- Canned Cycle for Drilling
- Stored Pitch Error Compensation
- Inch/Metric Conversion
- Machine Lock
- Dry Run
- Single Block
- C Keyboard Type Manual Data Input(MDI)
- High Resolution 9" Monochrome CRT
- Part Program Storage & Editing
- Background Editing
|
- Registerable Programs- 200 Programs
- Part Program Storage Length- 320m
- Self Diagnosis Functions
- Emergency Stop
- Overtravel Release
- Stored Stroke Check 1
- Interlock- Each Axis, All Axes in Auto Operation, Block Start, Cutting
Block Start interlock
- Status output- NC Ready, Servo Ready, Alarm, Distribution End, Automatic
Operation, Sutomatic Operation. Start lamp, Feed Hold, Reset
- Servo Motor- FANUC AC Servo Motor (digital). Servo Unit- PWM Transistor
Drive
- Position Detector- Pulse Coder
- Work Coordinate System Selection w/ 48 Pairs
- Automatic Corner Override
- Helical interpolation
- Input of Offset Value by Programming
- Scaling
- Program Restart
|
