Mason Mechanical Labs, Inc.  New Machinery Quote

       PHONE : 540-387-0463      FAX : 540-389-0463      DATE :

Toll Free: 1-800-925-1838

Sharp HS Series EDM Drill

w/ Fuzzy Logic Control
Specifications
Model
HS-813F
HS-1014F
Work Table
18"x8.3"
23.6"x11.8"
X&Y Travel
13"x7.9"
13.8"x9.8"
Ram Servo Travel
13.5"
13.5"
W-Axis
-
7.9"
Guide Travel
5.9"
5.9"
Max. Workpiece Weight
220 lbs.
992 lbs.
Electrode Size
0.0118"-0.118"
0.0118"-0.118"
Max. Electrode Length
15.7"
15.7"
Ram Platen to Table
6.8"x9.8"
19.6"x14"
Machining Dielectric
Distilled Water
Distilled Water
Capacity of Dielectric
5 gal x2
5 gal x2
Machine Weight
1,400 lbs.
2,000 lbs.
Dimensions
43"x58"x83"
43"x61"x82"
Power Input
220/440 V, 3 phase
220/440 v, 3 Phase
Max. Power
3.5 kva
5 kva
Max. Peak Current
38 amps
38 amps
Sparking Condition #
100 Sets
100 Sets
Features
  • 100 Sets of Machine Condition Memory
  • Includes 6 kinds of Machining Parameters: Peak Current, Capacitor, On Time, Off Time, Spark Gap, and Servo Sensitivity
  • Function of selecting "FUZZY" Machingin Condition: (a) Machining Material (electrode to workpiece), (b) Electrode diameter, (c) Electrode Wear
  • Includes 3 Axis DRO System: X&Y Axis uses Linear Scale, Z Axis uses Encoder
  • Five Kinds of Alarm Indicators: Arrived at Depth, Arcing, Low DIelectric, for Safety and Short Between Electrode and Workpiece
  • Anti-Collision System for Electrode
  • Z-Axis Sensor wil Automatically Set to Zero when Finding Edge
  • Use DRO Counter to Set Home Point, Electrode Wear and Machining Depth. Electrode will Automatically Retract to Home Point when Arriving at Depth
  • Using MOSFET Sparking Circuits, Suitable for Tungsten Carbide, Hard Alloys and Hardened Steel
  • Electrode Range from 0.3 to 3.0mm, apply to slanted, spherical and curved workpiece machining
  • Arc protecting Circuits Automatically Adjust "Off Time" when Machining is not Stable. If Arcing Persists, Sparking Will Stop
  • Special High-Pressure Pump Design, Dielectric comes out Quickly with Pressure Releasing Control System
  • Machingin Parameters can be Modified Temporarily while Sparking, without Affecting the Stored Program by Turning "FUZZY" Off
Standard Equipment
Optional Accessories
  • Precision Drill Chuck
  • 1.0mm x 300mm Long Brass Electrode Tubes
  • 1.0mm Ceramic Guide
  • 3 Axis DRO
  • Stainless Clamping Set
  • Brass/Copper Electrode Tubes (300mm or 400mm long)
  • Ceramic Guides (sizes: 0.3-3.0mm, in 0.1mm increments)
  • Rubber Water Stoppers

 

Please Call For Current Pricing.

1-800-925-1838

View MML's Standard Terms and Conditions on-line.  View MML's Privacy Policy.

                 CHECK OUT  www.machinetoolsforsale.com   FREQUENTLY FOR UPDATED MACHINERY LISTING!