Mason Mechanical Labs, Inc.  New Machinery Quote

       PHONE : 540-387-0463      FAX : 540-389-0463      DATE :

Toll Free: 1-800-925-1838

Uni-Hydro Ironworkers
Model 42-14 shown

Description:

  • 42-Ton, 6" Open Throat Punch
  • Manual Punch Aligner
  • 14" Bar Shear with 4 Sided Blades
  • Bar Shear Hold-Down Can Be Fixed or Adjustable
  • Mitres Angle Iron in Bar Shear
  • Full Up and Down Two-Way Hydraulic Stroke Control
  • Variable Stroke Control
  • Magnetic Starter for Safety and Reliability
  • Built for Forklift Handling

 

 

 

Wiring: 220 V, 3 phase

Accessories:

See below for additional accessories and options available for the Ironworker series, as well as further Specifications for this and other models.

   
SPECIFICATIONS
MODEL T40-14
MODEL 42-14
MODEL 50-14
PRO-50
MODEL 66-24
Throat Depth
5-1/4"
6"
6"
6"
9"
Punch
  • 1" hole in 1/2"
  • 1-3/8" hole in 3/8"
  • 1-1/16" hole in 1/2"
  • 1-3/8" hole in 3/8"
  • 1-1/4" hole in 1/2"
  • 13/16" hole in 3/4"
  • 1-1/4" hole in 1/2"
  • 13/16" hole in 3/4"
  • 1-5/8" hole in 1/2"
  • 2-1/4" hole in 3/8"
Bar Shear
  • 3/8" x 14"
  • 1/2" x 10"
  • 5/8" x 6"
  • 3/8" x 14"
  • 1/2" x 10"
  • 5/8" x 6"
  • 3/8" x 14"
  • 1/2" x 10"
  • 5/8" x 8"
  • 3/4" x 6"
  • 3/8" x 14"
  • 1/2" x 10"
  • 5/8" x 8"
  • 3/4" x 6"
  • 1/4" x 24"
  • 3/8" x 22"
  • 1/2" x 16"
  • 3/4" x 10"
  • 1" x 6"

Angle Shear 90°:

  • Slug Type
  • Sever Cut

 

  • 3" x 3" x 3/8"
  • 3" x 3" x 1/4"

 

  • 3" x 3" x 3/8"
  • 3" x 3" x 1/4"

 

  • 3" x 3" x 3/8"
  • 4" x 4" x 3/8"

 

  • 3" x 3" x 3/8"
  • 4" x 4" x 3/8"

 

  • 6" x 6" x 3/8"
  • 5" x 5" x 1/2"
  • 4" x 4" x 3/8"

Mitre Angle 45°:

  • Bar Shear
  • Slug Type

 

  • 3" x 3" x 3/8"
  • 2" x 2" x 5/16"

 

  • 3" x 3" x 3/8"
  • 2" x 2" x 5/16"

 

  • 3" x 3" x 3/8"
  • 2" x 2" x 5/16"

 

  • 3" x 3" x 3/8"
  • 2" x 2" x 5/16"

 

  • 4" x 4" x 1/2"
  • 4" x 4" x 3/8"
Channel Shear
1" & 2" Combined or 3" Standard
1" & 2" Combined or 3" Standard
2" & 3" Combined or 4" Standard
2" & 3" Combined or 4" Standard
2" & 3" Combined; 4"or 5" Standard

Rod Shear:

  • Round (max.)
  • Square(max.)

 

  • 3/4"
  • 3/4"

 

  • 3/4"
  • 3/4"

 

  • 1-1/16"
  • 1-1/16"

 

  • 1-1/16"
  • 1-1/16"

 

  • 1-1/4"
  • 1-1/4"
Coper Notcher 90°.
For 3" x 3" x 1/4" angle
For 3" x 3" x 1/4" angle
For 3" x 3" x 1/4" angle
For 3" x 3" x 1/4" angle
For 4" x 4" x 3/8" angle
Square Notcher
1-3/4" x 2" x 1/4"
1-3/4" x 2" x 1/4"
1-3/4" x 2" x 1/4"
1-3/4" x 2" x 1/4"
3" x 3" x 3/8"
Notching Station Square Notcher
2" x 3" x 3/8"
Pipe Notcher (Sched 40 or 80)
1/2" , 3/4", 1", 1-1/4", 1-1/2"
1/2" , 3/4", 1", 1-1/4", 1-1/2"
1/2" , 3/4", 1", 1-1/4", 1-1/2", 2"
1/2" , 3/4", 1", 1-1/4", 1-1/2", 2"
1/2" , 3/4", 1", 1-1/4", 1-1/2", 2"
Brake
6" or 9" x 1/4"
6" or 9" x 1/4"
6" or 9" x 1/4"
6" or 9" x 1/4"
6", 9", 14", 18" or 24"

Strokes Per Minute:

  • Light Material
  • At Max Capacity:

 

  • 50
  • 7

 

  • 50
  • 7

 

  • 50
  • 7

 

  • 50
  • 7

 

  • 50
  • 9
Hydraulics
1,000 psi
1,000 psi
1,200 psi
1,200 psi
2,000 psi
Oil Capacity
15 quarts
15 quarts
20 quarts
20 quarts
16 gallons

Motor:

  • Standard
  • Optional

 

  • 3 HP, 3 ph
  • 3 HP, 1 ph

 

  • 3 HP, 3 ph
  • 3 HP, 1 ph

 

  • 5 HP, 3 ph
  • 5 HP, 1 ph

 

  • 5 HP, 3 ph
  • 5 HP, 1 ph

 

  • 7-1/2 HP, 3 ph
  • 7-1/2 HP, 1 ph

Dimensions:

  • Width
  • Length
  • Height
  • Bar Shear Working Height
  • Punch Table Top Height
  • Cavity Table Top Height
  • Notcher Station Working Height

 

  • 32"
  • 46"
  • 63-1/2"
  • 30"
  • 38-3/16"
  • 37-1/4"
  • .

 

  • 28"
  • 34"
  • 60"
  • 29"
  • 38-1/4"
  • 37-1/2"
  • 22" (N42-14)

 

  • 27-1/4"
  • 33"
  • 57"
  • 29"
  • 38-1/4"
  • 37-1/4"
  • .

 

  • 27-1/4"
  • 33"
  • 57"
  • 29"
  • 38-1/4"
  • 37-1/4"
  • 26"

 

  • 37"
  • 46"
  • 70"
  • 29"
  • 29"
  • 39-1/4"
  • 41"
Weight (net)
1,710 lbs.
1,240 lbs.
1,330 lbs.
1,720 lbs.
2,840 lbs.

Accessories and Options Available

  • Punches and Dies (Round, Square, Rectangle, Oval, Hex). In stock from 1" to 2-1/2". Special Shapes and Sizes can be made.
  • Oversize Punches up to 4" diameter hole.
  • Coper Notcher to cut V-notches.
  • Square Notcher
  • Pipe Notcher Housing and Die. For Notching Schedule 40 or 80 Pipe.
  • Punch Rack. holds up to 30 sets of L series punches and dies.
  • Slug Type Angle Shear. Removes 3/8" or 1/2" slug with each cut. Produces High Quality Cuts with minimal distortion.
  • Universal Sever housing.
  • Sever Cutting Blades. Works in Universal Housing to cut angle, rod or channel with no material loss. Special shapes and sizes available.
  • Oversize Dia Stand, Oversize Stripper and Offset Die Stand. Can be specially built to your needs.
  • Punch Station Spring Return Brakes.
  • Brake Mounted in Power Cavity. Variety of brakes available to meet you light metal bending needs.
  • Bar Shear Stop. For production shearing up to 24" long pieces.
  • Deluxe Back Guage. For production shearing up to 6' long.
  • Steel Bin Catcher. Catches drop pieces from the bar shear.
  • Punch Table with Adjustable Jig. For accurate, high production punching
  • Bar Shear Table. Extends table length from 3" to 12". Standard equipment on all 24" bar shear machines.
  • Grease Bank. For greasing fitting under machine covers without removing covers.
  • Remote Hydraulic Foot Control. For Ironworkers up to 50-ton capacity. (Larger models have standard electronic foot control)

Please Call For Current Machine and Accessory Pricing.

1-800-925-1838

View MML's Standard Terms and Conditions on-line.  View MML's Privacy Policy.

                 CHECK OUT  www.machinetoolsforsale.com   FREQUENTLY FOR UPDATED MACHINERY LISTING!